New Holland Construction
New Holland Construction

2010 New Holland Construction B95B TC Backhoe Loader

Model Overview & Specs

Engine
Engine TypeTier III certified, electronic high pressure common rail, 4-cycle diesel
Horsepower97 HP (72 kW)
Rated RPM2,200 rpm
AspirationTurbocharged
Fuel Capacity35.6 gal. (135 l)
General
Max Ground Speed20 mph (32.2 kph)
Tire Size4WD Front: 12-16.5; 4WD Rear: 19.5L-24
Length24 ft. (7010 mm)
Width7 ft. 5 in. (2300 mm)
Height9 ft. 5 in. (2870mm)
Weight18,135 lbs.
Wheelbase2WD: 85.6 in. (2175 mm); 4WD: 85.6 in. (2175 mm)

New Holland B Series loader backhoes feature a new curved, narrow boom design. Not only does the design lower transport height and increase digging power, it also provides excellent visibility. No matter where you look, you can work with confidence, even in confined spaces. The slim cab pillars and sloped hood allow excellent visibility to the front edge of the loader bucket.


New Holland B Series Loader Backhoes are Tier III certified for low emissions.


Precision swing control delivers better operation in tight areas.


New Holland loader backhoes are the industry-leaders in loader breakout force. They excel in tough digging conditions.


The New Holland backhoe has a very narrow boom, which provides excellent visibility and reduces operator fatigue.


360º visibility lets operators work with confidence. Controls are easy to reach and operate. Gauges are easy to read.


New Holland loader backhoes deliver outstanding visibility no matter where you look, allowing you to work with confidence, even in confined spaces. New Holland loader backhoes sit higher to provide better visibility to the trench and worksite around you.


The one-piece, easy-open rear window moves up and out of the way for unobstructed visibility all the way into the trench.


Daily maintenance is easier than ever! The flip-up hood is easy to open, and provides wide, easy access for routine maintenance needs. All daily service points are conveniently located at ground level on the left-hand side of the machine. A diagnostic test port under the left engine panel provides easy system pressure checks.


New Curved Boom Design
• Lowers transport height and increases digging power
• Narrow backhoe boom design gives operators an excellent view of the work area


Unmatched Power
• Tier III certified turbo-charged 4.5-liter engines
• High-capacity hydraulics boosts loading and digging cycle times
• Unbeatable lift capacity


Superior Dig Forces
• Class-leading backhoe SAE dig force
• Fast swing and excellent craning ability
• Industry leading loader bucket breakout force
• Excellent for high-production trenching or digging


More Dump Height and Reach
• Achieve maximum forward reach at maximum height
• Easily center-fill dump trucks
• Operate on uneven terrain with stability and confidence


Easy Servicing
• New easy-to-open flip-up hood makes daily maintenance easier than ever
• Extended 500-hour oil change interval decreases
operating costs
• Less maintenance time equals more productive work time


New Venturi Cone System
• Extends muffler life and reduces exhaust stack vibrations


Powerful New Engine (B95B, B95B TC, B95B LR, B110B, B115B)
• Electronic common rail turbo engine provides higher engine torque and more power
• Tier III certified reduces engine emissions
• Improved cold weather starting ability
• Improved fuel economy


Reach Higher and Farther
• Excellent reach at maximum dump height makes grapple and bucket work easy
• Precisely place loads where you want them
• Select from three counterweight options, ranging from 312 to 1,210 lbs., available for all B Series loader backhoes


Superior Loader Breakout Force
• Straight-arm loader linkage and dual cylinders deliver unmatched lift capacity, bucket rotation and breakout force
• Massive, integral loader tower and oversized torque tube provide the rigidity and strength needed for high capacity
• Functional back drag heel for productive backfilling and scraping is featured on all buckets


Superior Backhoe Dig Force
• Unmatched dig force
• Fast backhoe swing cycle time
• Wedge-style backhoe bucket reduces heel drag to effectively undercut when needed
• Narrow, high-strength, box-section boom offers greater visibility


Smooth, Stable Ride
• Optional four-wheel-drive for traction in tough conditions
• Full hydraulic, self-equalizing and self-adjusting wet rear disc brakes
• Optional Glide Ride for carrying heavy, loaded buckets over rough terrain with less spilling and a smoother ride


Comfort and Convenience
• Plenty of leg and foot room, even as you turn the seat
• Optional pilot control pillars adjust to accommodate any size operator
• High-output HVAC system provides quick cab warm-up or cool-down
• Easily reach every control in an instant–from the throttle and transmission shuttle lever to the lights, flashers and windshield wipers
• Two standard doors for easy entry from either side
• Large instrumentation is easy to read at a glance


Automatic Shifting on the Jobsite
• Sophisticated 4x2 powershift transmission with automatic shifting (standard on B115B and optional on B110B)
• Automatic four-wheel-drive and kick-down for effortless shifting over any terrain
• Gear selection display


One-Lever Loader Control
• Work with low effort and high precision: pull back to raise the bucket, push forward to lower it
• Disconnect the transmission and direct full power to the loader with the push of a button


Tough Construction
• Massive one-piece box section steel main frame
• Tough, double-reduction front axles deliver high torque transfer to the ground, without compromising ground clearance
• Reliable in-board planetary rear axles provide years of service in harsh working conditions


Long-Life Engines
• Advanced 4.5-liter turbocharged FPT engines use heavy-duty valve train components and a self-adjusting poly V-belt for durability
• Oil jets cool the underside of the pistons for perfect temperature control—a feature usually reserved for higher horsepower engines
• Bosch injection pumps provide virtually smoke-free start ups


Superior Cooling
. Coolers are stacked with tubes arranged in an inline ¡°flow through¡± design for easy cleaning
. Designed to work in consistent 100¢ª F temperatures Fast-Response Hydraulics
. Advanced open-center hydraulic system uses a clean, simple design with fewer parts than competitive closed-center systems
. Dual gear pumps deliver hydraulic flow of up to 42 gallons per minute
. Extra-strong grill and cast-iron nose provides added durability in loader applications


Easy to Service
. Simple routine maintenance made easy
. All daily service points are conveniently located at ground level of the machine.
. Fill engine oil, hydraulic tank, fuel tank and transmission fluid from ground level


Quick-change loader attachments
An optional auxiliary hydraulic circuit can be used with a mechanical quick-attach system or an electro-hydraulic quick coupler for fast and easy hookup to many attachments.
• Sweeper brooms
• Angle dozer
• Four-in-one bucket
• Snow blower
• Scrap grapple
• Forks


Optional auxiliary backhoe hydraulics
Auxiliary backhoe hydraulics expand your versatility. A foot pedal in the cab activates the auxiliary hydraulics to run these backhoe attachments:
• Hydraulic breaker
• Hydraulic compactor
• Hydraulic auger
• Hydraulic thumb


Hand-tool attachments
An optional hand-tool circuit conveniently located on the front, left side of the machine provides a convenient power source for hydraulic hand-tools like these:
• Posthole digger
• Hand-held breaker
• Chop saw
• Cable cutter
• Chain saw
• Hydraulic trash pump
• Hand-held compactor
• Auger


Backhoe attachments
• Backfill blade
• Cemetery bucket
• Pavement-removal bucket
• Ripper teeth
• V-ditching bucket

  • Gross horsepower: 97 HP / 72 kW
  • Loader breakout force: 14,209 lbs. / 6,400 kg
  • Backhoe bucket capacity: 7.5 cu. ft. / .21 cu. m.
Dimensions
  • Transport length: 24 ft. (7010 mm)
  • Transport height: 12 ft. 6 in. (2810 mm)
  • 2WD Wheelbase: 85.6 in. (2175 mm)
  • 4WD Wheelbase: 85.6 in. (2175 mm)
  • Height to top of cab: 9 ft. 5 in. (2870 mm)
  • Ground Clearance: 15.5 in. (394 mm)
  • Blade width: 88.6 in. (2250 mm)
  • Bucket Rollback at ground level: 44°
  • Bucket Rollback raised: 55°
  • Digging depth below grade: 7.5 in. (295 mm)
  • Transport width: 7 ft. 5 in. (2300 mm)
  • Operating stabilizer spread: 10 ft. 7 in. (3226 mm)
  • Transport stabilizer spread: 7 ft. 5 in. (2300 mm)
  • Leveling angle stabilizer spread: 14 in.
Weight
  • Base Unit: 18,135 lbs.
  • With 2WD Option: -386 lbs.
  • With Canopy Option: -397 lbs.
  • With 4x1 Option: +770 lbs.
  • With 6x1 Option: +1,810 lbs.
  • With Std. (counterweight): -769 lbs.
  • With Med. (counterweight): -239 lbs.
Transmission
  • Manufacturer: Turner
  • Transmission Type: Power-reversing/Torque conv.
  • Power Shuttle Standard: Yes
  • Gear: 4F/4R
  • Forward Max Travel Speed: 20 mph (32.2 kph)
  • 4WD Front Tire Size: 12 - 16.5
  • 4WD Rear Tire Size: 19.5L - 24
Engine
  • Make and Model: FPT 445TA/E3
  • Type: Tier III certified, electronic high pressure common rail, 4-cycle diesel
  • Aspiration: Turbocharged
  • Governed RPM: 2,200 rpm
  • Number of Cylinders: 4
  • Displacement: 273 cu. in. (4.5 l)
  • Gross Horsepower: 97 HP (72 kW)
  • Net Horsepower: 91 HP (68 kW)
  • Peak Torque: 334 lb-ft (453 N-m) @ 1,400 rpm
Maneuverability
  • 2WD Curb Clearance Less Brakes: 13 ft. 6 in.
  • 2WD Curb Clearance with Split Brakes: 12 ft. 7 in.
  • 4WD Curb Clearance Less Brakes: 15 ft. 9 in.
  • 4WD Curb Clearance with Split Brakes: 11 ft. 5 in.
  • 2WD Bucket Clearance Less Brakes: 17 ft. 9 in.
  • 2WD Bucket Clearance with Split Brakes: 16 ft. 8 in.
  • 4WD Bucket Clearance Less Brakes: 19.5 ft. 5 in.
  • 4WD Bucket Clearance with Split Brakes: 16 ft. 6 in.
Hydraulic System
  • System Type: Open center
  • Main Pump Type: Dual gear
  • Pump Capacity: 40 gpm (151 l/m)
  • System Relief Pressure: 3,045 psi
Electrical
  • Alternator Output: 90 amps
  • Battery Capacity (std/opt): 1200/900 CCA
Refill Capacities
  • Fuel Tank: 35.6 gal. (135 l)
  • Cooling System: 6.4 gal. (24 l)
  • Engine Oil Including Filter: 3.7 gal. (14 l)
  • Hydraulic Tank: 19.7 gal. (75 l)
  • Hydraulic System: 31 gal. (118 l)
Swing
  • Swing Force: 5,800 lb-ft.
  • Swing Torque: 20,901 lb-ft.
Cylinder Specs
  • Loader Cylinder: 3.54 in. bore X 28.6 in. stroke
  • Backhoe Boom Cylinder: 5 in. bore X 35.71 in. stroke
  • Backhoe Arm Cylinder: 4.75 in. bore X 27.64 in. stroke
  • Backhoe Bucket Cylinder: 3.3 in. bore X 30.16 in. stroke
  • Backhoe Swing Cylinder: 4.33 in. bore X 9.38 in. stroke
Service Intervals
  • Engine Oil: 500 hours
  • Hydraulic Oil Filter: 1,000 hours
  • Engine Coolant: 2,000 hours
  • Rear Axle Oil: 1,000 hours
Loader Dimensions (1.3 cu. yd. Heavy-Duty General Purpose)
  • Max Operating Height: 14 ft. (4253 mm)
  • Height to Hinge Pin: 10 ft. 10 in. (3306 mm)
  • Dump Height: 7 ft. 10 in. (2386 mm)
  • Max Dump Angle: 45°
  • Reach @ 45 degree Dump Angle: 3 ft. 9 in. (1151 mm)
  • Max Grading Angle: 130°
Loader Dimensions (Multi-Purpose 4x1)
  • Max Operating Height: 14 ft. 4 in. (4368 mm)
  • Height to Hinge Pin: 10 ft. 10 in. (3306 mm)
  • Dump Height: 8 ft. 4 in. (2536 mm)
  • Max Dump Angle: 45°
  • Reach @ 45 degree Dump Angle: 3 ft. 1 in. (933 mm)
  • Max Grading Angle: 130°
Loader Performance (1.3 cu. yd. Heavy-Duty General Purpose)
  • Linkage Geometry: 4-bar
  • Max Bucket Heaped Capacity: 1.3 cu. yd. (1.0 m3)
  • Bucket Breakout Force: 14,109 lbs. (6,400 kg)
  • Lift Capacity to Full Height: 6,856 lbs. (3,110 kg)
  • SAE Heaped Capacity: 1.3 cu. yd. (1.0 m3)
  • SAE Struck Capacity: 1.07 cu. yd. (.82 m3)
  • Bucket Weight: 880 lbs. (399 kg)
  • Cutting Width: 88 in. (2250 mm)
  • Raise to Full Height Cycle: 3.5 sec.
  • Dump Time Cycle: 2.2 sec.
  • Lower Cycle: 2.8 sec.
Loader Performance (Multi-Purpose 4x1)
  • Linkage Geometry: 4-bar
  • Max Bucket Heaped Capacity: 1.3 cu. yd. (1.0 m3)
  • Bucket Breakout Force: 14,056 lbs. (6,375 kg)
  • Lift Capacity to Full Height: 7,454 lbs. (3,160 kg)
  • SAE Heaped Capacity: 1.3 cu. yd. (1.0 m3)
  • SAE Struck Capacity: 1.07 cu. yd. (.82 m3)
  • Bucket Weight: 1,650 lbs. (748 kg)
  • Cutting Width: 88 in. (2250 mm)
  • Raise to Full Height Cycle: 4.4 sec.
  • Dump Time Cycle: 1.2 sec.
  • Lower Cycle: 3.4 sec.
Base Equipment
  • Engine: Dry dual-element air cleaner
  • Engine: Fuel filter w/ water separator 10 micron paper filter
  • Transmission: Power shuttle fully synchronized gearbox, 4 forward/4 reverse speeds, and power reversing torque converter
  • Transmission: Two position electric disconnect on loader control and gearshift
  • Rear Axle/Brakes: Planetary final drives
  • Rear Axle/Brakes: Mechanically-actuated differential lock
  • Rear Axle/Brakes: Multi-plate, hydraulic, self-adjusting, self-equalizing wet disc brakes
  • Rear Axle/Brakes: Independent parking/emergency brake
  • Front Axle: 74 in. tread
  • Front Axle: 8-bolt wheel hubs
  • Front Axle: Hydrostatic power steering with priority valve
  • Front Axle: Integrated steering cylinder
  • Front Axle: Cast Iron 2WD axle
  • Front Axle: Cast Iron FWD
  • Front Axle: FWD electrical engagement with indicator light
  • Electrical: 12-volt system
  • Electrical: 90 amp high-capacity alternator
  • Electrical: Single battery
  • Electrical: Sealed fuse block compartment
  • Electrical: Water resistant main fuse block
  • Lighting: 4 Halogen work lights on canopy
  • Lighting: 8 Halogen work lights on cab
  • Lighting: Stop and turn signals
  • Lighting: Four-way safety flashers
  • Backhoe: Curved boom, Center pivot swing post, Boom cylinder, and Dipper cylinder
  • Backhoe: 2-lever backhoe controls (SAE Pattern)
  • Backhoe: Dirt pads
  • Backhoe: Front counterweight - 282 lbs.
  • Backhoe: Dipper cylinder and dipstick
  • Backhoe: Backhoe bucket not included
  • Operator's station (ROPS): Dual side entry flat deck
  • Operator's station (ROPS): Interior rearview mirror
  • Operator's station (ROPS): Built-in beverage holder
  • Operator's station (ROPS): Key start switch with electric shut-off
  • Operator's station (ROPS): 2-position horn control
  • Operator's station (ROPS): Electric analog instrumentation
  • Operator's station (ROPS): Tachometer/hour meter
  • Operator's station (ROPS): Fuel gauge
  • Operator's station (ROPS): Fixed steering wheel
  • Operator's station (ROPS): Auxiliary 12-volt output/cigarette lighter
  • Operator's station (ROPS): Pre-wired for emergency beacon
  • Operator's station (ROPS): Pre-wired for road headlights
  • Operator's station (ROPS): Vinyl suspension seat
  • Operator's station (ROPS): 2-inch retractable seatbelt
  • Operator's station (CAB): Dual side entry flat deck
  • Operator's station (CAB): Interior rearview mirror
  • Operator's station (CAB): Built-in beverage holder
  • Operator's station (CAB): Coat hook
  • Operator's station (CAB): Pre-wired for radio
  • Operator's station (CAB): Key start switch with electric shut-off
  • Operator's station (CAB): Headliner
  • Operator's station (CAB): 2-position horn control
  • Operator's station (CAB): Molded floor mat
  • Operator's station (CAB): Electric instrumentation
  • Operator's station (CAB): Tachometer/hour meter
  • Operator's station (CAB): Fuel gauge
  • Operator's station (CAB): Interior dome light
  • Operator's station (CAB): Fixed steering wheel
  • Operator's station (CAB): Auxiliary 12-volt output/cigarette lighter
  • Operator's station (CAB): Pre-wired for emergency beacon
  • Operator's station (CAB): Pre-wired for road headlights
  • Operator's station (CAB): Adjustable side window openings
  • Operator's station (CAB): One-piece rear window
  • Operator's station (CAB): 3-speed heater/blower fan
  • Operator's station (CAB): Adjustable front sun-screen shade
  • Operator's station (CAB): Cloth suspension seat
  • Operator's station (CAB): 2-inch retractable seatbelt
  • Operator's station (CAB): Heater
  • Loader: Curved loader arm design
  • Loader: 4-Bar bucket linkage
  • Loader: Bucket level indicator
  • Loader: Return-to-dig feature
  • Loader: Dual lift and bucket cylinders
  • Loader: Single lever control
  • Loader: Loader arm support
  • Loader: 1.3 yd3 heavy duty bucket
  • Loader: Bolt-on cutting edge
  • Loader: Mechanical self leveling
  • Hydraulics: O-ring Face seal connectors
  • Hydraulics: "PD" type diagnostic port connectors
  • Hydraulics: Open center coaxial drive hydraulic pump
  • Hydraulics: 10 micron spin-on filter element
  • Hydraulics: Tandem pump - 151 l/min (40 gpm)
  • Safety and Security: 4-Post ROPS/FOPS
  • Safety and Security: Lockable Compartments for engine, hydraulic system, battery and tool storage
  • Safety and Security: Lockable fuel cap
  • Safety and Security: Horn
  • Safety and Security: Backup alarm
Optional Equipment
  • Engine: Grid heater starting aid
  • Engine: 110-volt engine block heater
  • Engine: Centrifugal dust bowl pre-cleaner
  • Electrical: Dual batteries
  • Backhoe: 2-lever pilot controls with pattern changer
  • Backhoe: Mechanical backhoe bucket quick coupler
  • Backhoe: 4-lever backhoe controls
  • Backhoe: 2-lever ISO excavator pattern backhoe controls
  • Backhoe: HED extendible dipperstick
  • Backhoe: Multiple bucket options from factory
  • Backhoe: Heavy-duty and extra heavy-duty backhoe buckets
  • Backhoe: Flip over stabilizer pads
  • Operator's station (ROPS): Electric ON/OFF control of hydraulic hand tool function
  • Operator's station (ROPS): Foot-activated switch control of backhoe hammer
  • Operator's station (CAB): Air conditioning system
  • Operator's station (CAB): Electric ON/OFF control of hydraulic hand tool function
  • Operator's station (CAB): Foot-activated switch control of backhoe hammer
  • Operator's station (CAB): 3-inch retractable seatbelt
  • Operator's station (CAB): Tilt steering wheel
  • Operator's station (CAB): Super deluxe Air Ride seat
  • Operator's station (CAB): Cloth suspension seat
  • Operator's station (CAB): Vinyl suspension seat
  • Loader: Multiple buckets available
  • Loader: Aux hydraulics
  • Hydraulics: Backhoe hammer circuit
  • Hydraulics: Mid-mount hand tool circuit
  • Hydraulics: Extra function backhoe valve with control pedal (less HED)
  • Hydraulics: Glide Ride control system
  • Total Vehicle: Fire extinguisher
  • Total Vehicle: Special order paint colors
  • Total Vehicle: External rearview mirrors
  • Total Vehicle: Front fenders
  • Total Vehicle: Operator cooling fan
  • Total Vehicle: 4wd driveshaft guard kit
  • Loader Attachments: Sweeper brooms
  • Loader Attachments: 4x1 bucket
  • Loader Attachments: Auger
  • Loader Attachments: Claw
  • Loader Attachments: Forks
  • Loader Attachments: Scrap grapple
  • Backhoe attachments: Hydraulic breaker
  • Backhoe attachments: Hydraulic auger
  • Backhoe attachments: Hydraulic thumb
  • Backhoe attachments: Additional buckets

Compare Models

 






   
Year2010  
ManufacturerNew Holland Construction  
ModelB95B TC Backhoe Loader  
Style Loader Backhoe  
Engine
Engine TypeTier III certified, electronic high pressure common rail, 4-cycle diesel  
Engine Manufacturer   
Horsepower97 HP (72 kW)  
Rated RPM2,200 rpm  
AspirationTurbocharged  
Fuel Capacity35.6 gal. (135 l)  
General
SAE Rated Operating Capacity   
Bucket Capacity   
Self Leveling Bucket   
Max Ground Speed20 mph (32.2 kph)  
Tire Size4WD Front: 12-16.5; 4WD Rear: 19.5L-24  
Length24 ft. (7010 mm)  
Width7 ft. 5 in. (2300 mm)  
Height9 ft. 5 in. (2870mm)  
Weight18,135 lbs.  
Wheelbase2WD: 85.6 in. (2175 mm); 4WD: 85.6 in. (2175 mm)  

Save & Email Listing

Can't see this image?  Try refreshing by clicking on the refresh icon.Refresh CAPTCHA

Your privacy is important to us. We will not contact you without your consent to receive offers, other than to provide you with the link to your saved listing.

Factory Promotions
Hours
Mon7:00 a.m.5:00 p.m.
Tue7:00 a.m.5:00 p.m.
Wed7:00 a.m.5:00 p.m.
Thu7:00 am5:00 pm
Fri7:00 a.m.5:00 p.m.
SatClosed
SunClosed